Table of Contents
Advertisement
Safety
For UL and other safety certifications, refer to the product label or the
Note
Product Certification
Electromagnetic Compatibility
Note
For the standards applied to assess the EMC of this product, refer to the
Product Certification
For EMC compliance, operate this device with shielded cables.
Note
CE Compliance
© National Instruments Corporation
Isolation Voltages
Connect only voltages that are within the following limit:
Channel to channel or
Channel to earth ..................................... 250 V
Safety Standards
This product meets the requirements of the following standards of safety
for electrical equipment for measurement, control, and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1, CSA 61010-1
section.
This product meets the requirements of the following EMC standards for
electrical equipment for measurement, control, and laboratory use:
•
EN 61326 (IEC 61326): Class A emissions; Basic immunity
•
EN 55011 (CISPR 11): Group 1, Class A emissions
•
AS/NZS CISPR 11: Group 1, Class A emissions
•
FCC 47 CFR Part 15B: Class A emissions
•
ICES-001: Class A emissions
section.
This product meets the essential requirements of applicable European
Directives as follows:
•
2006/95/EC; Low-Voltage Directive (safety)
•
2004/108/EC; Electromagnetic Compatibility Directive (EMC)
A-5
Appendix A
Specifications
, continuous
rms
Online
Online
SCXI-1121 User Manual
Advertisement
Table of Contents
