Signal Connection When connecting your signals to the SCXI-1302, follow the labeling on the SCXI-1302 for the appropriate module, as indicated in Figure 2. To connect the signal to the terminal block, perform the following steps, referring to Figures 1 and 2 as necessary: Unscrew the top cover screws and remove the cover.
Figure 2 shows the SCXI-1302 signal connections. 1 Pins 39-50 3 Pins 9-38 5 Product Name, Assembly Number, Revision 2 Screw Terminals 4 Pins 1-8 Letter, and Serial Number Figure 2. SCXI-1302 Signal Connections Installation To connect the terminal block to the SCXI module front connector, perform...