Advertisement
Ways to input memory tares
3.11
The indicator can long time keep 200pcs tare value. Three ways to input tare data:
Input tare in digit： （*：is original setting value）
1、
Step
Operation
1
Press [Vehicle No.]
Enter
vehicle
2
Press [Enter]
Enter tare
3
Press [Enter]
4
2. Save tare by weighing： In the state of indicating gross weight, put empty vehicle go on the platform.
When steady, press [save tare], enter vehicle No., and finally press [Enter].
3. If no tare record in the memory when saving a group of weight records, the tare in the group
of records will be saved into memory for the vehicle No.
4）Notice
Normal Notice
4.1
Display
Note
Please Wait. Data transferring between indicator and printer
Print
Data Storing. Display time no more than 2 seconds to remind the operator.
LoAd
Lo bAt
Low battery Alarm to remind user change battery or use AC power supply
Free memory（Weighing records）less than 10pcs, please clear weighing records
a.s.a.p. Press any key to back to weighing status
Err 17
（If there remains uncompleted twice weighing records, we suggest to clear after it is
completed）
Err 18
Weighing records are full. Please clear the weighing records a.s.a.p.
This notice will be appeared after Err18. It means the indicator is transferring the
dt ****
weighing records. Please wait until 0. Please clear the weighing records a.s.a.p.
Error Operating Notice
4.2
Display
Load cells are not connected or wrong connection.
Err 02
Err 03
Overload Alarming. All or part of the load should be discharged.
Operating Error.
Err 08
Err 09
No Such vehicle Number.
More than 200pcs vehicle number has been saved.
Err 10
Input eligible date or time; Please input correct date or time.
Err 16
Not able to print under no weighing, minus weighing, unstable weighing or weighing
Err 19
value has not back to the set print lower limit
Error Setting Notice
4.3
Note
Display
Setting does not meet manifest requirement. Printing Error. Please reset.
Err 12
Wrong printer type is chosen, please reset.
Err 13
Components Error and Debugging Notice
4.4
Display
Note
Clock chip damaged. Time setting will be lost after turn off. Please change
Err 22
for a new clock chip
2
E
PROM is damaged. Replace with a new chip, then turn on the indicator or
Err 23
calibrate again after inputting previously-calibrated data.
Calibration data lost. System will reset the calibration parameter. If a new
Err 25
Display
In the state of weighing
No.
[o *****]
[o 35790]
[P *****]
[P 01000]
Return weighing
Remarks
Enter cargo No.
Enter tare eg：1000(kg)
Over
Note
eg：35790
Advertisement
