Advertisement
3.6 Inner Code Display
Under weighing display state, press [SET PRINT] key, then input [2][8], the indicator will start code display
state, and the light of code display bright press [WEIGH] can exit from code display state., and the code
display light turn off. Under code display state, only [set zero]、[set print] is available to use.
3.7 Weighing Records Saving
1. In the indicator, cargo No. is 5-digit, goods No. is 2-digit. 200 Vehicle No. and 100 Cargo No. can be saved
maximum.
2. Once a group of complete records are saved, the records will be printed simultaneously (if print function is
set to be effective).
3. Three ways to save：
1）First save the weight of empty cargo, then weight of full cargo; or, first save the weight of full cargo, then
empty cargo. That's to say, only after two times of saving, will a group of complete records be created.
2）If tare is known, a group of complete records can be created only by saving the weight of full cargo.
3）If goods are to be weighed instead of cargo with goods, a group of complete records can be created only
by one time of saving.
In order to automatically identify and differentiate the 3 conditions above, it is regulated as
：
below:
▲ Cargo number should be one between 00001～99999, ie, 00000 can not be used
as a real cargo No. If you set the cargo No. as 0000, the indicator will regard the cargo
as goods.
▲ If the tare light is on, it means the tare is known. So only one saving is needed to
create a group of complete records.
▲ If the cargo No. is set to be a random 5-digit number except 00000, and the tare
light is off (ie, when it displays gross weight), it will requires two times of saving to
create the a group of complete weight records.
1、Saving Methods：
Steps
Operations
Press[Print]
1
2
Press numeral key to
input Vehicle No.
3
Press[Enter]
4
Press numeral key to
input Cargo No.
5
Press[Enter]
Press numeral key to
input
percentage
6
Press[Enter]
Data saving can be set in terms of Use Vehicle No. or Not Use Vehicle No. If without Vehicle No. mode is
selected, all actions or printing related to vehicle No will not exist. Likewise, the data saving can be set in
terms of Use Cargo No. or Not Use Cargo No..
Saving cannot be done when data is not steady, or the tare≤0, or net wt≤0.
Automatic saving and print
2、
No. and Cargo No. have been set before saving. The automatic saved tare value has the following
three conditions
：①
When tare light is on, the present tare will be saved to this record
light is off, it will automatically look for the tare record against vehicle No. in the memory, and save
；③
the tare into indicator.
saved into the record as tare.
If there are over 200 vehicle No., the indicator will display [Err 10]. You can delete certain vehicle No.
3、
or save all of them according to Section 10 in the Chapter hereof. If the saved records are over 500
groups, the indicator will automatically delete the first group data.
3.8 Printing
Under Weighing Status
Press[Set Print]
Input"04"+
Display
[ENTER]
[HL **]
★
2
Display
[o *****]
Ask to input Vehicle No. Press
status
[o 01234]
Example：01234
[hn
** ]
Ask to input Cargo No.
[hn
56 ]
Example：56
[bFL **]
Ask to input deduct percentage
[bFL 10]
Example：10. When the fill in print format is selected and use
deduct
the deduct percentage, this setting will be available.
[ ***** ]
Complete and back to weighing status
：
No twice saving mode when automatic saving and print； The Vehicle
When tare light is off, and no record in the memory for the tare, 0 is to be
Display
I"97"
[P000000]
+ [ENTER]
Display
Input"50"
[Arr *]
+
[ENTER]★3
Remarks
[Print] under weighing
Display
"0"
Input
[Auto *]
★
[
ENTER]
Input"3"
Display
+
[L *****]
[ENTER]★
4
；②
When tare
Auto Symbol
+
Light on
1
[Type **]
Input"100"
+ [ENTER]
★
5
Advertisement
