Page 2
Characteristics Adjustable Flow Rate Rugged Diaphragms…….…0 to 8.5 m /hr (0-37 gpm) Air Operated Diaphragm Pumps Teflon Diaphragms………..0 to 6.8 m /hr (0-30 gpm) may generate fluid pressures equal to the air supply pressure. Pump Connections Suction……………..…..1” 150# ANSI/ DIN #25 Flange DO NOT exceed the recommended Discharge…………..….1”...
Page 3
Center Ported Dimensions Metallic Dimensions Page 3...
Installation This pump comes with a footed base for easy mounting in permanent installations. The pump should be mounted in a vertical position. In permanent installations, the pump should be attached to plant piping using a flexible coupling on both the intake and discharge connections to reduce vibration to the pump and piping. To further reduce vibration, a surge suppressor next to the pump may be used.
Page 6
Surge Suppresser Filter Regulator A typical installation showing all the Pressure Supply Lubricator Gauge Flexible Shut Off Connection Valve components that are recommended in a Fluid system, including valves, pressure gauges, air Discharge Shut Off Shut Off Valve Valve regulators, filters, and surge suppressors. Union or Pipe Flange Connection...
Page 7
Versa-Matic Pump Company Pump Model Number With Rubber & XL With Teflon Elastomers Model E1, 1” Elima-Matic Elastomers Plastic Pump Parts List E1PP E1KP E1PP5_5T E1KP5_5T Polypropylene Kynar (PVDF) Polypropylene Kynar (PVDF) Item Description Qty. Applicable Part Number Air Valve Assembly E100 Valve Body E100A...
Page 9
Versa-Matic Pump Company Pump Model Number With Rubber & XL With Teflon Elastomers Model E1, 1” Elima-Matic Elastomers Metallic Pump Parts List E1AP E1SP E1AP5 E1SP5 E1HP5 Aluminum Stainless Aluminum Stainless Hastelloy Steel Steel Item Description Qty. Applicable Part Number Air Valve Assembly E100 Valve Body...
Page 11
Safety Warnings This equipment should only be maintained by experienced professional technicians. Observe all safety warnings. Read all safety warnings and operating manuals before using or repairing this Air Operated Diaphragm Pump. Any misuse of this equipment such as over-pressurization, modifying parts, pumping incompatible fluids, using worn or damaged parts, or using gasses other than compressed air to power the pump is not recommended.
Temperature Limitations Temperature Limitations Maximum temperature limitations are based on mechanical stress only. Certain chemicals will reduce the maximum safe operating temperature of A.O.D. pumps. Consult your dealer or Chemical Resistance The diaphragm plates (sometimes referred to as piston Guide for compatibility and temperature limits. plates) located inside the pump on either side of the main shaft move when air pressure is supplied to the Polypropylene: 0...
Page 14
E1 1" Bolted Plastic Pumps With Metallic Center Sections Operating Instructions E1 Polypropylene E1 Kynar...
SPECIFICATIONS AND PERFORMANCE Versa-Matic Model Displacement Per Stroke, (Avg.), 0.10 Gal. (0.38 L) E1 Bolted 1" Pump AIR CONSUMPTION IN SCFM Flow Rate AIR PRESSURE IN PSI Adjustable to ..0-35 gpm (132 lpm) SCFM M 3 /HR Port Size Inlet .
E1 1" Bolted Plastic Pump — Optional Side Ports 1" ANSI 150# / DIN Fluid Discharge Connection 8.06 [204.7] 3/8" NPT Air Inlet Connection 1/2" NPT Air Exhaust Connection 7.16 Opposite Side [181.9] 5.50 [139.7] 14.75 [374.7] 5.13 12.40 [130.3] [315] 3.62 [91.9]...
Page 17
INSTALLATION, OPERATION AND MAINTENANCE Installation especially on the suction side of the pump, that all The pump should be mounted in a vertical position. fittings and connections are air tight or pumping In permanent installations, the pump should be efficiency will be reduced and priming will be difficult. attached to plant piping using a flexible coupling on both the intake and discharge connections to reduce Make certain the air supply line and connections...
PARTS LIST Plastic AIR VALVE ASSEMBLY Aluminum Item Description V alve Body P50-102A V alve Spool P98-104 V alve Spool U-cup P098-104A E nd Cap P98-300 E nd Cap Gasket P98-110 B earing Sleeve P98-103 Bearing Sleeve O-ring P98-103A Air Diverter P98-105 V alve Insert P98-106...
ATEX INFORMATION Products: 2. Elima-Matic Cast Iron Pumps 1. Elima-Matic and Ultra-Matic Pumps with Stainless Steel Air Ends II 2 G / II 3 G EEx c T4/T5 II M2 EEx c I T4/T5 Group II, category 2 and 3, gas explosive atmos- Group I, category M2, constructional safety phere, constructional safety ignition protection, ignition protection, Temperature rating “T4”...
Page 22
Teflon® is a registered trademarks of DuPont. Versa-Dome®, Versa-Matic®, Versa-Tuff® and Versa-Rugged VR™ are registered tradenames and trademarks of IDEX Corporation. VERSA-MATIC ® PUMP COMPANY A Unit of IDEX Corporation 6017 Enterprise Drive Export, PA 15632-8969 (724) 327-7867 Fax: (724) 327-4300 www.versamatic.com...