Multitech MultiConnect BT MTS2BTA Quick Start Manual page 10

Multi-Tech Systems, Inc. Quick Start Guide
Slave Command Sequence Example
From Power Up:
1. Check and verify Communication to Slave.
Sent: AT<cr>
Reply: <cr_lf>OK<cr_lf>
2. Get information on Slave Bluetooth address.
Sent: ATSi,1<cr>
Reply: 12-digit address
<cr_lf>OK<cr_lf>
3. Set Slave to automatically connect in Fast Data Mode on
Bluetooth connection.
Sent: ATSW25,0,0,0,0 <cr>
Reply: <cr_lf>OK<cr_lf>
Either cycle power or send ATURST.
Note: This command sequence assumes the radio is set to
factory defaults that allow it to automatically come up and be
ready to connect as a Slave from a Master request.
10