Advertisement
h. Type the following command into the
wizard's "Command" box. Then press Enter.
=CALSKEW,XX.X
NOTE: XX.X = the LNB angle you just recorded.
NOTE: If the angle you recorded is a negative
number, be sure to use a negative (–) sign when
entering the angle. For example, if the digital level
measures 10.5°, and it is angled clockwise from
vertical, you would type =CALSKEW,–10.5.
i.
Repeat Step g. Verify that the level now reads
0° (within 1°).
j.
Reinstall the radome and restore power to the
TracVision system and any connected
receivers and/or multiswitch.
The procedure is complete!
7
Advertisement
