Before Use; During Use; After Use - Silvercrest SCNM 100 A1 Operating And Safety Instructions Manual

Safety instructions

Before use

Obtaining practical information is recommended before using the device for the first time. If you are not familiar
with the operation of sewing machines, we recommend that you attend an introductory course.
Always check that the mains voltage matches the voltage indicated on the labelling of the device.

During use

1. Check the power cord for damage before use. If the power cord is damaged, replace it with an original cord
that is only available from the manufacturer or its customer services.
2. Never leave the device unattended when it is switched on. Unplug the device if you leave it unattended to
avoid injury from accidental switch-on.
3. Keep body parts, hair, clothing and gloves away from moving parts. Make sure that you do not come into
contact with the running needle.
4. Do not continue to use worn needles.
5. If the power cord is damaged or cut during work, do not touch the power cord but disconnect the power
plug immediately.
6. Do not continue to use the device if the power cord is damaged; replace it with a new original power cord.
Other power cords may damage the device.
7. In the event of an electrical or mechanical malfunction, switch off the device immediately and disconnect the
power plug.

After use

When leaving the sewing machine, immediately disconnect the mains plug from the socket. Disconnect the mains
plug from the socket before carrying out maintenance and cleaning work.
16 EN