Assembly Instructions - Kobalt KPH 3580-06 Manual

ASSEMBLY INSTRUCTIONS

1. Connect the upper tube and the lower tube
a. Align the arrow on the end of the lower tube (K) with
the arrow on the upper tube (M). Connect both tubes
together.
b. Rotate the collar (L) toward the locked symbol to secure
the tubes together.
WARNING
Periodically check the connections to ensure that they are
tightened securely.
2. Attach the auxiliary handle
a. Position the front/auxiliary handle (A) onto the lower
portion of the trimmer section by sliding over the lower
tube (K).
b. Once the front handle is in the desired position, align
the hole on the handle with the hole on the bracket (BB),
then slide the bolt (CC) through the top of the handle and
secure with the fastening knob (AA). Tighten until there is
no movement in the handle.
c. The front handle can be adjusted to a suitable position.
Hardware Used
AA Fastening knob
BB Bracket
CC Bolt
3. Strap
a. Rotate the strap harness to the upward position.
b. Hook the strap to the strap connection.
1
K
2
x 1
x 1
x 1
3
12
CC
AA
BB
L
M
A
K