OPERATING INSTRUCTIONS
1. Holding and controlling the pole hedge trimmer
•
the handles. Make sure you always have good balance
and secure footing.
•
one hand on the front/auxiliary handle and the other on
the rear handle.
2. Starting and stopping the pole hedge trimmer
• Push forward on the safety lock button (J), making sure it
is in the unlocked position.
• Squeeze the trigger switch (R) to start.
• Release the trigger switch (R) to stop.
3. Adjusting the trimmer head angle
The trimmer head pivots 135° and can be locked into 7
positions within that range.
a. Pull back on the pivot button (N).
b. While pulling the pivot button, move the head forward or
backward.
c. Release the pivot button once the trimmer head is in the
desired position.
d. The trimmer head should lock securely in place.
1
2
3
14
J
R
N