Brake Light Switches; Checking The Front And Rear; Brake Pads - Yamaha MT-09 SP Owner's Manual

Periodic maintenance and adjustment
braking performance, which may re-
sult in loss of control and an acci-
dent.
8

Brake light switches

The brake light should come on just
before braking takes effect. The brake
light is activated by switches connect-
ed to the brake lever and brake pedal.
Since the brake light switches are
components of the anti-lock brake sys-
tem, they should only be serviced by a
Yamaha dealer.
8-19
EAU36505

Checking the front and rear

brake pads

The front and rear brake pads must be
checked for wear at the intervals spec-
ified in the periodic maintenance and
lubrication chart.
Front brake pads
1. Brake pad wear indicator
Each front brake pad is provided with
wear indicators, which allows you to
check the brake pad wear without hav-
ing to disassemble the brake. To check
the brake pad wear, check the position
of the wear indicators while applying
the brake. If a brake pad has worn to
the point that a wear indicator almost
EAU22393
EAU36891
1 1