Yamaha MT-09 SP Owner's Manual page 36

Instrument and control functions
MODE display
5
This display shows the currently se-
lected "D-MODE" and "TCS-MODE"
settings. The mode that is enlarged
and displayed on the right can be ad-
justed using the MODE up/down
switches. Use the "MODE" switch to
toggle left-right between "TCS-MODE"
and "D-MODE".
See page 4-3 for information on "D-
MODE" and "TCS-MODE" settings.
TIP
 When the engine trouble warning
light " ", the auxiliary system
warning " ", or the coolant tem-
perature warning "
MODE" and "TCS-MODE" cannot
be adjusted.
 The previously selected modes
will be displayed when the vehicle
power is turned on.
To turn off the traction control system,
select "TCS-MODE" with the "MODE"
switch, then push and hold the MODE
up switch until "OFF" is displayed. To
turn the traction control system back
on, press the MODE down switch
("TCS-MODE" will return to its previ-
ous setting).
TIP
 When "TCS-MODE" has been set
to "OFF", the traction control sys-
tem, SCS and LIF systems are all
turned off together.
 The "TCS-MODE OFF" and "TCS-
MODE M" settings can only be se-
lected
stopped.
Clock
The clock uses a 12-hour time system.
See page 5-17 to set the clock.
" are on, "D-
Quick shifter indicator "QS"
When able to shift, the respective QS
or turns green.
while the vehicle is
5-11
When unable to shift, QS
white.
If the quick shifter function is turned
OFF, QS itself is not displayed.
The quick shifter functions can be
turned on or off in the setting MENU.
See page 5-15.
TIP
The upshift and downshift functions
are independent and can be activated
separately.
For more information on the quick
shifter see "Quick shifter" on page 4-6.
Setting menu icon " "
Choose this icon and push the wheel
switch to change the settings MENU
screen. (See page 5-13.)
Grip warmer indicator (Option)
The grip warmers can be used when
the engine is running. There are 10
temperature levels. When activated,
the indicator will display the tempera-
ture level from 1 (lowest) to 10 (high-
est).
is