9
GAS CONVERSION
9.1
Warnings
The commissioning of this boiler and
system must only be undertaken by a
Gas Safe Registered Engineer, quali-
fied to work on Liquefied Petroleum Gas
(LPG) in accordance with the require-
ments of the Gas Safe Installation and
Use Regulations.
Components used to adapt it to the type
of gas available must be genuine parts
only.
Factory setting = Natural gas.
9.2
Operations and gas setting
Check that the gas cock mount-
ed on the gas piping to the boil-
er is closed and that the appli-
ance is not powered.
• Enter "programming mode" by pressing
the 11 and 13 keys simultaneously for 5
seconds (Fig. 9.1) until HiS (Boiler Histo-
ry) appears on the LCD display (Fig. 9.2).
10
11
Fig. 9.1
Fig. 9.2
GAS CONVERSION
15
14
13
12
• Scroll through the various menus by
pressing the keys 11 (back) or 13 (for-
ward), until PAr (Parameters menu) ap-
pears on the LCD display (Fig. 9.3).
• Press the 12 key for 1 second to enter the
selected menu.
Fig. 9.3
• Scroll through the various parameters by
pressing the keys 11 (back) or 13 (for-
ward), until P02, which alternates with the
parameter value, appears on the LCD dis-
play (Fig. 9.4).
Fig. 9.4
• Press the 12 key for 1 second (Fig. 9.1) to
enter the selected parameter. The display
will show the following (Fig. 9.5).
- 63 -