Table of Contents
Advertisement
Coaxial pipe Ø 60/100 with 90° bend (B)
Nominal length
Minimum length
Maximum length
Additional bends at 45° or 90° (Fig. 6.6 C)
Coaxial bends Ø 60/100 mm.
These bends when used with the pipe re-
duce the maximum length of the flue pipe
by:
For the bend of 45° loss
For the bend of 90° loss
Exhaust intake split pipes kit Ø 80 mm -
(Fig. 6.7) - (Fig. 6.8)
This kit allows the flue exhaust to be sepa-
rated from the air intake.
Split pipes kit Ø 80 mm
Minimum length
Maximum length (a + b)
N.B: The air intake and the flue outlet
must not terminate on opposite sides of
the building (EN 483).
Type C
13
Fig. 6.7
Bends of Ø 80 mm at 90° and at 45° are
available that reduce the maximum total
length of the pipes by:
INSTALLATION
For the bend of 45° loss
1.55 m
For the bend of 90° loss
0.5 m
Type C
10 m
0.5 m
Fig. 6.8
1 m
Roof flue exhaust kit (Fig. 6.9)
This kit exhausts directly to the roof.
Coaxial pipe Ø 60/100 mm
Nominal height
Maximum height
Coaxial pipe Ø 80/125 mm
0.5 m
Nominal height
40 m
Maximum height
Type C
Fig. 6.9
Extensions are available for reaching the
maximum height.
Bends at 90° and at 45° are available that
reduce the maximum total length of the
53
30 kW
33
0.9 m
1.65 m
90°
45°
0.96 m
10 m
0.96 m
15 m
90°
45°
- 39 -
Advertisement
Table of Contents
