Table of Contents
Advertisement
Pluming kit B (Fig. 6.11) (Fig. 6.12)
Push on type Ø 60 mm vertical plume man-
agement kit
This kit allows the products of combustion to
be discharged at a different location, when
used with the standard horizontal flue kit.
90° =--- 0,85 m
ø 60 mm
45° =--- 0,65 m
Fig. 6.11
Each additional elbow reduces the overall
acceptable length of the flue system as fol-
lows:
For the bend of 45° (60/100 mm) loss 0.5 m
For the bend of 90° (60/100 mm) loss
For the bend of 45° (60 mm) loss
For the bend of 90° (60 mm) loss
The chart Fig. 6.12 gives the maximum al-
lowed value for a + b of (Fig. 6.11).
INSTALLATION
90° =--- 1 m
ø 60/100 mm
45°
=--- 0,5 m
1 m
0.65 m
0.85 m
"a" vertical length (m)
11
10
9
8
7
6
5
4
Allowed values
o
3
2
1
0
0
1
2
3
4
Fig. 6.12
A Plume deflector is available to assist in
overcoming boundary nuisance issues.
Fig. 6.13
6.9
Electric connection
• Unscrew screws "M" and remove the front
panel "N" by pulling it and pushing it to-
wards the top so that it is freed from the
top housing Fig. 6.14 and Fig. 6.15.
M
Fig. 6.14
d
u
5
6
7
8
9
10
"b" horizontal length (m)
- 41 -
11
Advertisement
Table of Contents
