Omron G3PX EUN Series Manual page 15

G3PX
ON/OFF Control
Enables noiseless temperature control at
low cost with no complicated maintenance
work required.
Voltage output
Temperature
Controller
J LIST OF FUNCTIONS
Select most suitable model depending on the application and purpose.
Item Use
Level indicator Output LED indicator
Soft-start Soft up and down time between approximately 0.1 s and 1 s
Extended soft start Soft up and down time between approximately 0.5 to 10 s
Base-up Continuous output is possible after input is turned OFF. The
base-up variable resistor is adjustable between 0% and 100%
Element-ON failure Detects failures in power elements caused by short-circuiting
detection
Single-heater burn- Enables heater burnout detection in phase control of a single
out detection heater
Multiple-heater Enables single-heater burnout detection in phase control of a
burnout detection maximum of five heaters connected in parallel
Constant current Possible to control heaters that change their resistance values
control greatly due to temperature changes
Current limit control Enables current control below rated current
Overcurrent Protecting the elements from overcurrent that cannot be sup-
detection pressed in constant current control
Controlled object
Cycle Control
Noiseless, high-speed response
Current output
SSR Temperature
Controller
Phase Control (Single- - phase model)
Highly accurate temperature control
enables each heater to withstand long use.
Half cycle
SSR and Cycle Temperature
Control Unit Controller
Single phase
Single-function
Basic models
G3PX-2jjEUN
Yes
—
Yes
Yes
—
—
—
—
—
—
Alloyed heater
(Nichrome)
G3PX
Current output
Power
Controller
Advanced-function
Constant-current models
G3PX-2jjEC
Yes
—
Yes
—
Yes
Yes
—
Yes
Yes
Yes
Pure metal heater (Kan-
thal super)
15