Advertisement

Brennenstuhl LuxPremium LED TL 600 AF / 1200 AF - Flashlight Manual

Operating instructions

SAFETY INSTRUCTIONS

  • Read the operating instructions carefully prior to use.
  • Do not use the torch if it is damaged.
    Please contact an electrician or write to the service address provided.
  • Do not look directly into the light.
  • Do not use the flashlight in an explosive environment as this poses a fatal risk!
  • Only use a certified USB source to charge the batteries.

OPERATION

  • Drain the battery completely and recharge before using the lamp for the first time.
  • 2 possible modes of operation
    • Push the switch (1): 100% - off - 40% - off - 10% - off - SOS - off
    • Soft-touch function by tipping the switch: 100% (push) - 40% - 10% - SOS - off (push).
  • The flashlight CANNOT be used while charging.
  • Charging indicator (5): red during charging, green when the battery is charged.
  • If the lamp is not used for an extended period of time, it is recommended that the battery be charged every 3 months.

OVERVIEW OF THE CONTROLS

OVERVIEW OF THE CONTROLS

  1. On/Off switch
  2. Switch end piece
  3. Charger socket
  4. Sealing cap
  5. Charging indicator (Red/Green)
  6. Focus
  7. USB charging cable

CHARGING

Screwing off the switch end piece (2). Only charge your battery using a USB charging cable (7).
Exclusively use a certified USB power source (e.g. charging device, computer) with a maximum of 5 V output voltage:
Connection: USB source – USB charging cable (7) – charging socket (3). Screwing the switch end piece (2) down.
Please note that the product is only IP67-compliant (dust-tight and protected against temporary immersion in water) if the battery has been correctly inserted.
During the charging process, the product is not IP67-compliant (dust-tight and protected against temporary immersion in water).

BATTERY EXCHANGE

Unscrew switch end piece (2), screw off end cap (4), remove and replace battery, screw on end cap (4), screw on switch end piece.
Replacement batteries (TL 600 AF) can be purchased from Hugo Brennenstuhl (see address) under the art. no. 0293135.
Replacement batteries (TL 1200 AF) can be purchased from Hugo Brennenstuhl (see address) under the art. no. 0293143.

TECHNICAL SPECIFICATIONS

Type description TL 600 AF TL 1200 AF
LED: CREE-LED CREE-LED
Battery: KBT 18650 dual pole Li-Ion 3.7 V/2.6 Ah KBT 26650 dual pole Li-Ion 3.7 V/4.0 Ah
USB charging input: 5 V/1 A (Micro-USB) 5 V/2 A (Micro-USB)
Charging time: ~ 4.0 h ~ 4.0 h
Protection class: IP 67/IK 07 IP 67/IK 07
Temperature range: -10°C - +40°C -10°C - +40°C

DECLARATION OF CONFORMITY

The declaration of conformity is stored at the manufacturer's.


Do not dispose of electrical appliances, batteries and rechargeable batteries with your household rubbish.
Waste electrical and electronic devices, batteries and rechargeable batteries are classified as hazardous waste. They must be collected separately from general waste to be recycled in an environmentally compatible manner.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Brennenstuhl LuxPremium LED TL 600 AF / 1200 AF - Flashlight Manual

Advertisement

Need help?

Need help?

Do you have a question about the LuxPremium LED TL 600 AF and is the answer not in the manual?

Questions and answers

Table of Contents