Brennenstuhl LuxPremium LED THL 300 - Flashlight Operating Instructions

SAFETY INSTRUCTIONS

• Read the operating instructions carefully prior to use.
• Do not use the torch if it is damaged.
  Please contact an electrician or write to the service address provided.
• Do not look directly into the light.
• Do not use the flashlight in an explosive environment as this poses a fatal risk!
• Do not mix old and new, nor alkaline, carbon zinc or rechargeable batteries.

OPERATION

• Screw off the lamp head and remove the COB-switch-rack .
  Insert the supplied batteries into the battery compartment according to the marking.
  Re-insert the COB-switch-rack and screw on the lamp head again.
• 3 possible operating modes by activating the on/off switch
  1. Sequences by subsequent pressing:
     Spotlight front 100% - 20%, floodlight 100% - 40% - red - red flashing - off
  2. Keeping pressed: Floodlight 100%
  3. Pressing quickly two times: Floodlight red flashing.
• If the device has not been used for a longer period of time, check the batteries every 3 months and replace them if necessary.

OVERVIEW OF THE CONTROLS

1. Spotlight
2. Floodlight
3. On/off switch
4. Lamp head
5. Magnet
6. Hook

TECHNICAL SPECIFICATIONS

LEDs: CREE and COB

Battery: 3x AA

Protection class: IP 54

Temperature range: -10°C - +40°C

DECLARATION OF CONFORMITY

The declaration of conformity is stored at the manufacturer's.

Do not dispose of electrical appliances, batteries and rechargeable batteries with your household rubbish.
Waste electrical and electronic devices, batteries and rechargeable batteries are classified as hazardous waste. They must be collected separately from general waste to be recycled in an environmentally compatible manner.

For more information, we recommend the Service/FAQs area on our homepage www.brennenstuhl.com.