Mpio FL 100 User Manual page 22

FL100-Eng-EU2 12/5/96 3:23 PM
9. If you click on the Preview Begin Button, you can find the start logo
in the logo image Box.(If you click on the Preview End Button, the
logo is displayed in the logo image Box.)
10. Check the logo image and click on the Save Button.
* In case the PC is connected to the device, the logo file created
can be applied to the device directly.
C. FM Stations Editor
: It stores information about the channel(frequency) to be stored in FM
Station and the Station to be displayed on the MPIO LCD.
1. Turn the power of MPIO on and connect the USB cable to the PC
and MPIO.
2. Check the message, "USB CONNECTED" on the MPIO LCD.
3. Run the MPIO Manager 2.
4. Check the size of internal memory/memory card in the memory infor-
mation part.
5. Select the Tools item from the Menu Bar of the MPIO Manager 2.
6. Click [FM Stations Editor].
7. When the FM Stations Editor window appears, save FM Station
Channel and the detail information.
You can input the detail information of FM Station with 16 characters
in English.
D. Firmware Upgrade
: You can upgrade the Firmware easily, using MPIO Manager 2.
* The firmware is downloadable on the MPIO Web Site.
1. Store firmware upgrade file on the computer.
2. Turn the power of MPIO on and connect the USB cable to the PC
and MPIO
3. Check the message, "USB CONNECTED" on the MPIO LCD.
4. Run the MPIO Manager 2.
5. Check the size of internal memory/memory card in the memory infor-
mation part.
6. Select the Tools item from the Menu Bar of the MPIO Manager 2.
7. Click the Firmware Upgrade item.
8. If Firmware Upgrade window appears, search the folder in which the
firmware.
9. Select the Player.rom file and click 'Open' button.
10. If firmware upgrade is completed, click on the 'OK' button.
When the firmware upgrade is completed, the power of the device is
turned off automatically. Deletion of the USB cable from the PC and
the device before the power is turned off, might cause a damage of
the device. Pay attention to this.
42
English
Page 42
5) How to use MPIO Audio
A. Control's Overview
1. Play/Pause Button
2. Stop Button
- Stop Playing the file.
3. Volume Button
- Control the volume level.
4. Music Switch Button
- Play Previous/Nest Music.
5. MPIO LCD Window
• Scrolls the file information playing.
• Displays the status of the file being played.
• Displays the Repeat set up in MPIO Audio Player.
• Displays the setup status of Mute Function.
• Playing time of a file is displayed.
• Displays bit rate of the file playing.
6. MPIO Visual LCD Activation Button - Visual LCD Screen is activated.
7. MPIO Visual LCD
• Display the Visual Screen while playing a file.
8. Repeat Button - Select the play order of the play list.
9. Mute Button - Execute Mute Function.
10. Add/Delete File Button - Add/Delete a File To/From the Play List.
11. File Transfer Button - Transfer Audio Play List File to Memory.
12. Audio Information - Number & Size of the Selected File.
43
English