Record Function; How To Use Sd Card/Mmc - Mpio FL 100 User Manual

FL100-Eng-EU1 12/5/96 3:21 PM

4. Record Function

TIP
A file created from the record function of FL100, will be stored in the MPIO
RECORD Folder which the MPIO reserved.
* The Record File is saved as the bit rate of 33kbps.
* When the record time is less than 5 sec., the Record File is not created.
1. Voice Record
1) If you press the Record but-
ton in the pause state of
Playback Mode, it starts to
record voice.
2. FM Record
1) In case pressing the Record
button while receiving FM, it
starts to record FM.
TIP
- The MPIO RECORD folder is reserved by MPIO. Please pay attention not to
use name of MPIO RECORD Folder.
- The Record File is saved in the internal memory. Remember that the Record
File is not created in the Memory Card.
30
English
Page 30
2) If you want to complete the voice
record, press the Record button
again.
3) The voice record files are stored
in the MPIO RECORD folder by
the file name of VOICE001.wav,
VOICE002.wav etc..
2) If you want to stop the FM
Record, press the Record button
again.
3) The FM record files are stored in
the MPIO RECORD folder by the
file name of FM001.wav,
FM002.wav etc..

5. How to use SD Card/MMC

If the external memory is needed, SD Card(Security Digital)/MMC
can be used.
When you insert or remove SD Card/MMC, make sure to turn the
power of MPIO off.
Inserting
the SD Card/MMC
1. In case of inserting the SD Card/MMC:
Open the cover, push the SD Card/MMC to the end.
2. In case of ejecting the SD Card/MMC:
Open the cover, press the end point of the SD Card/MMC.
3. In case of removing the SD Card/MMC :
The SD Card/MMC will come out automatically if you press the
end point of the SD Card/MMC.
Ejecting
the SD Card/MMC
31
English