Table of Contents
Advertisement
VII Installation instructions
7.1 Precautions
•
The moisture analyzer is used to measure the moisture content of a sample. Improper
operation of the analyzer may result in personal injury and/or equipment damage.
•
Make sure the power cord is connected according to the instructions in the manual.
•
Do not use the equipment in a hazardous, wet, or unstable environment.
•
Unplug the power cord before cleaning the equipment.
•
The equipment should be located in a well-ventilated area with at least 1 meter of free
space between the top of the analyzer and the ceiling.
•
Please wear protective equipment when necessary.
•
Do not modify alter or modify the analyzer. If maintenance of this equipment is required,
it should be done by factory-authorized professionals.
•
Do not put inflammable materials near the instrument.
•
Do not handle the halogen lamp when it is hot.
•
Care should be taken when testing the moisture level of hazardous or poisonous
materials. Make sure that all the recommended precautions are followed.
•
Heating inflammable materials may produce highly flammable gas that could ignite.
Therefore, for this case, it is recommended that the process temperature be kept low and
all flames in the nearby area are extinguished.
•
Only process samples that are toxic or corrosive in well-ventilated areas.
•
The testing bench should be level and very stable.
•
The moisture analyzer is designed for use at room temperature, in a dry, well-ventilated
area. The operating area should be free of strong vibrations and large magnetic fields.
Version 1.0
User Manual
13
Advertisement
Table of Contents
