Table of Contents
Advertisement
Group Call
Service Area Selection
When making outgoing Group
Calls, you may choose from
three different service area
selections: Local Area, Tar-
geted Area, and Wide Area. In
each case, you are speaking
with members of the talkgroup
(shown on line 2 of the display)
who are in that service area.
Your unit is equipped with a
pre-programmed list of service
areas. You can add, edit, or
erase areas. You can also assign
names (aliases) to them. (See
the "Programming Menu"
section for programming
information.)
Local Area
A Local-Area Group Call allows you to communicate with talk-
group members located in the service area you are currently in.
Your radio automatically updates your Local Area as you travel
from one service area to another. Dispatchers are always included
in a Local-Area call, regardless of their location.
(Example: Talk to Talkgroup 7 members in your Local Area. Area 6 is your
current Local Area. Talkgroup 7 is your selected talkgroup.)
1. Press
.
GROUP
2. Press PTT.
10
USER'S GUIDE
Area selection only applies to
Group Calls you initiate. Your
last-selected area appears on
your display, regardless of the
origin of any incoming call.
Local Area is at the beginning
of your service area list. With
the
appearing on the top line
of the display, use the
to scroll to "LOCAL."
Pressing PTT allows you
to talk with "TALKGRP 7"
members who are currently in
your Local Area and your dis-
patcher.
LM2000/m370
Advertisement
Table of Contents
