10
IR, RF, Radio Code, and IR Frequency Settings
Trigger switch operation (TXC4 series only)
The TXC4 series transmitters have a trigger switch on the front underside of the unit.
On the TXC4L and TXC4L+ models, this switch operates the laser pointer. On the
TXC4 and TXC4+ models, this switch can be configured in one of two ways:
Configuration 1 (default): Pushbutton 1
Remove the battery cover and locate position 4 (Figure 6) of the DIP switch. If
position 4 is in the OFF position, the trigger switch functions exactly like the
pushbutton 1 on the topside of the transmitter. To set position 4, move the switch up
(ON) or down (OFF).
Configuration 2: Radio code offset shift
Remove the battery cover and locate position 4 of the DIP switch. If position 4 is in
the ON position, the trigger switch shifts up the radio code offset by 8 (e.g.: add 8 to
the radio code offset value to calculate the channel number being transmitted (see
Figure 9). To set position 4, move the switch up (ON) or down (OFF).
TXC Wireless Transmitters