3.3 Using the touchpad / clickpad
The touchpad / clickpad is a rectangular electronic panel located just
below your keyboard. Click twice left corner or right corner will open
or close touchpad functionality.You can use the static-sensitive panel
of the touchpad / clickpad and slide it to move the cursor. You can use
the buttons below the touchpad as left and right mouse buttons.
Press the left
and right
1
touchpad / clickpad to make selections and run functions. These two
buttons are similar to the left and right buttons on a mouse. Tapping
on the touchpad / clickpad produces similar results.
buttons located on the edge of the
2
1
•
Tap left corner twice to enable or
disable touchpad functionality
2
1
•
Tap the right corner twice to enable
or disable the functionality to the
right half of the touchpad
1
•
If no light indicators are present
on the left or right, the
touchpad is active on all areas
2
2
Notebook Manual 34
Need help?
Do you have a question about the Prometheus XVII and is the answer not in the manual?
Questions and answers