Motorola DCT2000 Installation Manual page 51

The in-band data activity indicator lights when the DCT 2000 is receiving a message. The
indicator is blank when you enter this diagnostic and three seconds after receiving the last
message. The indicator covers all packet processors regardless of which stream they are
monitoring.
Table B-6 lists the LED and OSD indications:
off
blank
on *
Table B-7 lists the LED and OSD indicator lights when the DCT 2000 is receiving a message on
the EMM stream. The indicator is clear when entering this diagnostic.
off
blank
on *
This diagnostic indicates that the digital in-band receiver is locked to the carrier.
Table B-8 lists the LED and OSD indications:
L YES
U NO
A
Analog
No data received
Data received
No data received
Data received
Carrier locked
Carrier unlocked
Analog channel
D i a g n o s t i c s