Motorola DCT2000 Installation Manual page 19

O v e r v i e w
Installing Batteries in Remote Control
Before using the remote control, you must install two AA (1.5 V) alkaline batteries. Figure 2-5
illustrates battery access on the back of the remote control.
To install batteries in an DRC 400:
Press and slide the battery compartment cover off.
Place the batteries in the compartment; be careful to observe the correct polarity.
Slide the battery compartment cover back into place.
Battery installation will vary with each style of remote control. Refer to the user instructions
included with your remote control for installing batteries.
+
+