Physical Requirements; Mechanical Specifications; Connector Specifications; Connector Pin Designations - BOSER Technology BBS-1080S Manual

Downloaded from Elcodis.com electronic components distributor
A.2 Physical Requirements
A.2.1 Mechanical Specifications
The mechanical drawing of the subject power supply, which indicate
the form factor, location of the mounting holes, location, the length of
the connectors, and other physical specifications of the subject power
supply. Please refer to the attachment drawing.
A.2.2 Connector Specifications
The power supply connectors are:
AC Inlet: Standard inlet socket 10A/250V, UL/CSA/VED approved
P1: The equivalent of MOLEX 39-01-2200, 20-pin connector
PA, PC, PD: The equivalent of AMP 1-480424-0, 4-pin connector
PB: The equivalent of AMP 171822-4, 4-pin connector
PE: The equivalent of MOLEX 39-01-2040, 4-pin connector
A.2.3 Connector PIN Designations
P1 PA, PC, PD
PIN1 +3.3V Orange +12V Yellow +12V Yellow COM
PIN2 +3.3V Orange COM
PIN3 COM Black COM
PIN4 +5V Red +5V
PIN5 COM Black
PIN6 +5V Red
PIN7 COM Black
PIN8 PW-OK Gray
PIN9 +5Vsb Purple
PIN10 +12V Yellow
+3.3V Orange
PIN11
+3.3VS Brown
PIN12 -12V Blue
PIN13 COM Black
PIN14 PS-ON Green
PIN15 COM Black
PIN16 COM Black
PIN17 COM Black
PIN18 N/C N/C
PIN19 +5V Red
PIN20 +5V Red
72
PB PE
Black COM Black COM
Black COM Black +12V Yellow
Red +5V Red +12V Yellow
Black
Black