Table of Contents
Advertisement
Downloaded from
Elcodis.com
electronic components distributor
5.4
Standard CMOS Setup
The Standard Setup is used for the basic hardware system
configuration. The main function is for Data/Time and Floppy/Hard Disk
Drive settings. Please refer to the following screen for the setup. When
the IDE hard disk drive you are using is larger than 528MB, you must
set the HDD mode to LBA mode. Please use the IDE Setup Utility in
BIOS SETUP to install the HDD correctly.
Phoenix – AwardBIOS CMOS Setup Utility
Standard CMOS Features
Date (mm:dd:yy)
Wed, Oct 31 2001
Time (hh:mm:ss)
10 : 32 :57
IDE Primary Master
IDE Primary Slave
IDE Secondary Master
IDE Secondary Slave
Drive A
[1.44M, 3.5in.]
Drive B
[None]
Video
[EGA/VGA]
Halt On
[All, But Keyboard]
Base Memory
Extended Memory
Total Memory
: Select Item
+ / - /PU/PD: Value
F5: Previous Values
F6: Fail-Safe Defaults
36
Item Help
Menu Level
Change the day, month,
year and century
640K
65472K
1024K
F10: Save
ESC: Quit
F1: General Help
F7: Optimized Defaults
Advertisement
Table of Contents
