Table of Contents
Advertisement
Downloaded from
Elcodis.com
electronic components distributor
5.8
PCI / Plug and Play Setup
This section describes configuring the PCI bus system. PCI, or
Personal Computer Interconnect, is a system that allows I/O devices to
operate at speeds nearing the speed the CPU itself uses when
communicating with its own special components. This section covers
some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.
Phoenix – AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
PNP OS Installed
Reset Configuration Data
Resources Controlled By
IRQ Resources
DMA Resources
PCI/VGA Palette Snoop
: Select Item
+ / - /PU/PD: Value
F5: Previous Values
F6: Fail-Safe Defaults
40
[No]
Item Help
[Disabled]
Menu Level
[Auto(ESCD)]
Select Yes if you are
Press Enter
using a plug and play
Press Enter
capable operating
system. Select No
[Disabled]
if you need the BIOS
to configure
non-boot devices
F10: Save
ESC: Quit
F1: General Help
F7: Optimized Defaults
Advertisement
Table of Contents
