Product Certifications - Emerson Rosemount 3300 Quick Start Manual

November 2022
7

Product certifications

Rev 4.25
7.1 European directive information
A copy of the EU Declaration of Conformity can be found at the end of the
document. The most recent revision of the EU Declaration of Conformity can
be found at Emerson.com/Rosemount.
7.2 Ordinary location certification
As standard, the transmitter has been examined and tested to determine
that the design meets the basic electrical, mechanical, and fire protection
requirements by a nationally recognized test laboratory (NRTL) as accredited
by the Federal Occupational Safety and Health Administration (OSHA).
Pollution Degree: 2
Overvoltage Category: II
In Canada: The power to this equipment must be supplied by a source that is
categorized as "CLASS 2" and "SELV" as specified in the Canadian Electrical
Code, C22.1 and the National Electrical Code NFPA 70.
7.3 Installing equipment in North America
The US National Electrical Code
(CEC) permit the use of Division marked equipment in Zones and Zone
marked equipment in Divisions. The markings must be suitable for the area
classification, gas, and temperature class. This information is clearly defined
in the respective codes.
7.4 USA
7.4.1 E5 Explosionproof (XP), Dust-Ignitionproof (DIP)
Certificate
Standards
Markings
Quick Start Guide
®
(NEC) and the Canadian Electrical Code
FM 3013394
FM Class 3600 – 2011; FM Class 3610 – 2010; FM Class
3611 – 2004; FM Class 3615 – 2006; FM Class 3810 –
2005; ANSI/ISA 60079-0 – 2009; ANSI/ISA 60079-11 –
2009; ANSI/NEMA 250 – 1991; ANSI/IEC 60529 – 2004
XP CL I, DIV 1, GP B, C, D; DIP CLII/III, DIV 1, GP E, F, G; T5
Ta=85°C; Type 4X/IP66
Quick Start Guide
33