November 2022
5
Configure
If the transmitter is pre-configured at the factory, this section is only
necessary to change or verify the settings.
Configuration of the Rosemount 3300 Level Transmitter can be done either
with a handheld communicator, the AMS Device Manager, or Radar
Configuration Tools (RCT). If using the Radar Configuration Tools, a HART
modem is required.
5.1
Installing the Radar Configuration Tools (RCT) software
To install the RCT software:
Procedure
1. Insert the installation CD into your CD-ROM drive.
2. Follow the instructions.
Need help?
If the installation program does not automatically start, run
Setup.exe from the CD.
5.2
Starting RCT
Prerequisites
For optimum performance set COM Port Buffers to 1.
Procedure
Select Programs → Rosemount → RCT.
Quick Start Guide
Quick Start Guide
®
25