Lumineux Carsington Plus Quick Start Manual

Carsington Plus
Sports
Floodlight
READ THESE INSTRUCTIONS
THOROUGHLY BEFORE
INSTALLATION KEEP THESE
INSTRUCTIONS FOR
FUTURE REFERENCE.
IMPORTANT:
This product must be installed
by a qualifi ed electrician or
competent person, and in
accordance with current building
and IET wiring regulations.

BOX CONTENTS

This lighting fi xture has been properly
packed to avoid damage during
transit. Before commencing with the
installation carefully inspect the
luminaire to confi rm there is no
damage. DO NOT INSTALL if any
damage has occurred to the fi xture
or any of its components.
• Light Fitting
• Instruction Manual
• Control Gear
(Purchased separately)

TOOLS REQUIRED

• 36mm Spanner
• Screwdriver
• Hex key
6mm & 8mm
A
D D
G

INSTALLATION INSTRUCTIONS

Installation must be conducted by a qualifi ed electrician.
The Carsington Plus has a variety of installation methods. See below:
Angle of eleva on 25 degree
Angle of eleva on 25 degree
Horizontal installa on
Horizontal installa on
Quick connectors for portable Control Gear
M1, M2 & M3
9.5
1. For wiring the driver remotely, an additional H07RN-F will be required. (not supplied)
2. Remote installation of control gear: Extend M1, M2 and M3 depending on wattage
3. Use IP68 connectors supplied with control gear
**
A Manby Business Park, Manby, Lincolnshire, LN11 8UT
E E
Lumineux is a B&T Associates Ltd company.
G
600W, 960W and 1650W
IP66 IK09
25 degrees Hois ng
25 degrees Hois ng
Ver cal Hois ng
Ver cal Hois ng
9.5
5
5
Technical Helpline: +44 (0)1507 328031
Carsington Plus
135 50,000
5 YR
Warranty
Lm/W Hours
Carsington Plus Control Gear
960W
90.00
90.00
Ø15.00
Ø15.00
Part No: 430512 Part No: 430512
100V - 277V
149.00
149.00
1650W 1650W
Part No: 430514 Part No: 430514
100V - 277V 100V - 277V
M1
M1
M1
M2 M1
M2
PLEASE READ THESE INSTRUCTIONS
Recommend 5 core cable
BEFORE INSTALLATION.
Cable size
1.5mm²
WARNING: Risk of electric shock! Isolate
the mains power before proceeding.
• Turn off the mains power before performing inspections, installation, + - + -
+ - + - 1 2 3 4
1 2 3 4
M1 M2
or removal M1 M2
+ -
1
• Verify that the supply voltage is correct by comparing it with the
M1
luminaire label information
• It is the installers responsibility to ensure installation is suitable for
the total load of the luminaire(s). The supply cable, fuses/circuit
brakers must be correctly rated for the electrical load and
considering for any transient inrush currents that may occur
+ -
+ -
A N
A N
• Do not perform insulation strength or resistance tests on installed
luminarie(s) connected
0-10V Dimming Connection AC Mains Connection
0-10V Dimming Connection AC Mains Connection
Da Da
Da Da
DALI Dimming Connection
DALI Dimming Connection
960W
90.00
Ø15.00
Ø15.00
Part No: 430526
390V - 415V
197.50
197.50
1650W 1650W
Part No: 430527 Part No: 430527
390V - 415V 390V - 415V
+ - + -
+ - + - 1 2 3 4
M1
1 2 3 4
M1 M2
M1 M2
M2
Recommend 5 core cable
Cable size Cable size
Cable size M3
1.5mm² 45m Max
45m Max
2.5mm² 90m Max
2.5mm² 90m Max
M1
M1
+ - + - + -
+ - + - + -
1 2 3 4 5 6
1 2 3 4 5 6
M1 M2 M3
M1 M2 M3
+ -
1 2
2
M1
A N
A N
+ -
+ -
0-10V Dimming Connection
0-10V Dimming Connection AC Mains Connection
Da Da
Da Da
DALI Dimming Connection
DALI Dimming Connection
www.lumineux.co.uk
90.00
M1
M2
M1
M3
A N
A N
AC Mains Connec