Table of Contents
Advertisement
DASDEC-III
Quick Start Guide
The Automatic Random Required Weekly Test Generator allows the device to create an alert that is active and
aired at random times within a preset time window. Using this feature, you can set a specific set of days and a
specific block of time to send this alert. To enable this feature, go to Setup > Station > Main and find the
'Automatic Random Weekly Test Generation' check box
(shown in
red) check to enable. Below this check box
is the day and timeslot selection options. Select the settings needed
(shown in
purple) &
(shown in
green).
Note: Be sure to Accept Time Changes otherwise the inputted settings will not take affect (Indicated by the exclamation
mark.)
The randomly generated RWT appears at the top of the Alert Events > All Events page when generated,
highlighted in yellow, showing the time the alert is good for and the date and time it will air.
Page
| 18
Rev: R10122022
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DASDEC-III DAS3-EX and is the answer not in the manual?
Questions and answers