Step 7 - Alert Decoding, Filtering & Forwarding - Digital Alert Systems DASDEC-III DAS3-EX Quick Start Manual

DASDEC-III
Quick Start Guide
Step 7 – Alert Decoding, Filtering & Forwarding
Filtering EAS alerts are done via Alert Nodes in the Alert Agent™. A decoded alert will have its contents
checked against the criteria set in each node, starting from the top and ending with the default node at the
bottom. If the alert matches all the requirements of a node, it will follow the forwarding action of that node.
These nodes can be found on the Setup > Alert Agent > Manage Alert Nodes tab. We recommend keeping
your setup as simple as possible.
Note: The default configuration is set to forward any decoded alert. Typically, this is not ideal, so some customization will
be required.
To edit a node, click the check box to enable the node (shown in black), followed by clicking the 'Edit' button
(shown in green). This will allow you to make changes to the fields within the node. When you click the 'Edit'
button, the node will be highlighted in orange and will pop out to a larger size compared to the other nodes
indicating that the fields can be edited. Once finished, click the green 'Accept' button at the top or bottom of
the page.
After clicking the edit button.
Page | 13 Rev: R10122022