Digital Alert Systems DASDEC-III DAS3-EX Quick Start Manual page 14

DASDEC-III
Quick Start Guide
Here is an example of a
common and configuration.
The RMT node is enabled and
set to auto-forward.
The Weather Alert node for
common weather alerts
experienced in the area.
The common filters used in
nodes are FIPS and EAS code
groups covered in step 6.
Note: For RMT's always include
both the state and county FIPs
codes.
At the top of the page is a
nodes and which node it will match without triggering an alert. Below is an image showing an RMT being
tested and reflecting the node it matched in green.
Page | 14
Test Node feature that allows testing how a specific EAS alert will filter through the
Rev: R10122022