Stiga R72 Li 48 V1 Operator's Manual page 70

PROBLEM
The icon in fig. 7.E remains ON and
battery LEDs 2, 3, 4 and 5 flash.
The battery LEDs in fig. 7.F turn ON
and OFF in sequence, from left to
right, and vice versa.
The icon in fig. 7.E remains ON and
battery LEDs 3 and 4 flash.
Cause
Parallel module electronics error.
Communication error between on-
board electronic modules.
Incorrect configuration of the
installed batteries.
EN - 10
Remedy
Switch off the machine and repeat the
starting procedure.
If the problem persists, contact a
Service Centre.
Switch off the machine and repeat the
starting procedure.
If the problem persists, contact a
Service Centre.
Check that the batteries are installed
with the correct configuration (see
technical data table).