Input Labels - Felston HD940 Owner's Manual

4-input hdmi digital

Hide thumbs

Table Of Contents

Table of Contents

Then press

Having set the Replacement Auto Latency for either

ng set the Replacement Auto Latency for either

interlaced or progressive video formats, you may wish to

repeat steps 1 through 5 for the other format.

While the Auto Replacement Latency feature of the HD940

does allow some form of automatic lip

does allow some form of automatic lip-sync even f

that do not supply their own latency values, you may prefer

to use the Extended Auto Delay mode (see page 22

to use the Extended Auto Delay mode (see page

HD940 since it provides the ability to control the automatic

delay for each video format individually

each video format individually.

In practise, there are so many factors that can affect the

synchronization of audio and video that no automatic mode,

however sophisticated, will cure it in all circumstances. And

so you may find it easiest and also most

so you may find it easiest and also most effective to set the

HD940's audio delay manually, changing the value as and

when required.

Input Labels

By default, the 4 input sources of the HD940 are displayed on

By default, the 4 input sources of the HD940 are displayed on-

screen as Input A,

Input Labels options in the Settings menu, it is possible to

change these to more meaningful names.

ange these to more meaningful names.

To change an input label, cycle through the settings in the

Settings menu until you reach the label for the input, e.g. for

Input C, cycle to:

C: Input C

Press

The display will change to yellow, indicating it is being changed,

The display will change to yellow, indica

and a "cursor" will appear after the text:

C: Input C_

to store.

o delay manually, changing the value as and

, Input B, Input C and Input D

sync even for TV's

22) of the

effective to set the

Input D. Using the

ting it is being changed,

Table of Contents