Exiting Cascade Mode - Felston HD940 Owner's Manual

Exiting Cascade Mode

xiting Cascade Mode
To take a HD940 out of Cascade Mode, follow these steps: take a HD940 out of Cascade Mode, follow these steps: take a HD940 out of Cascade Mode, follow these steps:
1. Disconnect power from all HD940's Disconnect power from all HD940's
2. Connect power to the HD940 you wish to leave Cascade Connect power to the HD940 you wish to leave Cascade Connect power to the HD940 you wish to leave Cascade
Mode (you can do this to more than one HD940 at the Mode (you can do this to more than one HD940 at the Mode (you can do this to more than one HD940 at the
same time)
3. Press and keep held down the Press and keep held down the
4. After 30 seconds approximately, notice input LEDs C and D After 30 seconds approximately, notice input LEDs After 30 seconds approximately, notice input LEDs
on the HD940 will flash 11 times. This indicates on the HD940
HD940 is out of Cascade Mode HD940 is out of Cascade Mode
5. Release the button Release the button
(zero) button (zero) button
. This indicates the
31