Set Sensitivity; Selection Of Grinding Option; Test; Power - Magmaweld MKM 720S TURBO User Manual

8 Operation

2.5 Set Sensitivity

• Sensitivity setting can be adjusted infinitely gradually from low to high with
EN
the rotary knob.
• The medium setting is normal for daily use.
• If the ambient light is too high or there is another machine welding nearby, set
the sensitivity to low.

2.6 Selection of Grinding Option

• When you move the Figure 5 button to the grinding position, you will get
a tarnish-free image This function will protect your face against splashes.
• You can re-adjust using the Figure 5 buttons to during welding.

2.7 Test

• You can test your dimming settings by holding down the Test button in Figure 6. It will return to its normal
position when you take your hand off the button.

2.8 Power

• When the Low Battery warning led in Figure 6 lights red, the battery should be replaced.
1 x CR 2032 Lithium Battery
USER MANUAL | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
MKM 720S / TURBO
SENSITIVITY
SENSITIVITY ADJUSTMENT
LO
Düşük
HI
Yüksek
Figure 4
Welding / Kaynak
Grinding / Taşlama
Figure 5
TEST
LOW
BATTERY
Figure 6
www.magmaweld.com