Important Safety Notice - Panasonic TH-65PHD8BK Service Manual

Components identified by
When replacing any of these components, use only manufacture's specified parts.
Notes:
1. Resistor
Unit of resistance is OHM [
2. Capacitor
Unit of capacitance is
3. Coil
Unit of inductance is H, unless otherwise noted.
4. Test Point
5. Earth Symbol
6. Voltage Measurement
Voltage is measured by a DC voltmeter.
Conditions of the measurement are the following:
7. When arrow mark (
8. Indicates the major signal flow.
9. This schematic diagram is the latest at the time of printing and subject to change without
notice.
TH-65PHD8 SERIES
Schematic Diagram Notes

Important Safety Notice

mark have special characteristics important for safety.
W
] (K=1,000, M=1,000,000).
m
F, unless otherwise noted.
: Test Point position
: Chassis Earth (Cold)
Power Source ................................................... AC120V, 50/60Hz (UK)
Receiving Signal ............................................... Colour Bar signal (RF)
All customer's controls ...................................... Maximum positions
) is found, connection is easily found from the direction of arrow.
: Line Earth (Hot)
AC220-240V, 50/60Hz (BK/EK)
: Video Audio