Table of Contents
Advertisement
System
The following table describes the items available in the System menu:
Item
Language
Sets the language for the projector.
Displays information on the current status of the projector including the current Device Name, Detected Resolution,
Projector
Picture Mode, Power Mode and Firmware Version.
Information
See
Updating firmware on page 35
Factory Reset
Returns the projector to its factory default state.
Updating firmware
1. Copy firmware file "BenQ_GV10_USB.bin" to the root directory of a FAT32 formatted USB flash drive.
2. Plug in the USB flash drive to the USB-A port on the projector.
3. Plug in the AC adapter.
4. Use
Left,
Right on the remote control to select the System menu and press OK.
5. Use
Up,
Down on the remote control to select Projector Information.
6. Highlight Firmware Version and press OK. A message "Are you sure to update FW?" will appear.
7. Select "Yes" to start the firmware update progress.
Options and descriptions
on how to update the projector's firmware.
35
Advertisement
Table of Contents
