Advertisement
Quick Links
Husqvarna FS450
2016-
S U P P L E M E N T A R Y M A N U A L
for iQSE-1 + QSH-F2F
Secure the bike on a stand.
Locate the fuel injector
connector under the fuel tank.
Connect the QSH connectors
in-line with the injector
connectors.
(Make sure the QSH plugs marked with RED
square are connected, and leave the unmarked
coupler unused. You may connect the male and
female plugs of the unused pair together or
isolate with tape.)
www.healtech-electronics.com
PAGE 1/3
Advertisement
Related Manuals for HealTech Electronics QUICKSHIFTER EASY
Summary of Contents for HealTech Electronics QUICKSHIFTER EASY
- Page 1 Husqvarna FS450 2016- S U P P L E M E N T A R Y M A N U A L for iQSE-1 + QSH-F2F Secure the bike on a stand. Locate the fuel injector connector under the fuel tank. Connect the QSH connectors in-line with the injector connectors.
- Page 2 Husqvarna FS450 2016- S U P P L E M E N T A R Y M A N U A L for iQSE-1 + QSH-F2F Connect the QSH black wire terminal to the battery negative terminal. Use the original bolt of the gearbox shaft, add the sensor and the original washer...
- Page 3 Husqvarna FS450 2016- S U P P L E M E N T A R Y M A N U A L for iQSE-1 + QSH-F2F Typical position for the QuickShifter easy. Secure the unit Properly. www.healtech-electronics.com PAGE 3/3...