Overview; Safety Guidelines; Safety Guidelines For Hazardous Locations - National Instruments NI-9852 Getting Started

Overview

This document explains how to connect to the NI 9852.
Note
Before you begin, read the NI 9852 Safety, Environmental, and
Regulatory Information document on
software and hardware installation procedures in your chassis
documentation.
Note
The guidelines in this document are specific to the NI 9852. The
other components in the system might not meet the same safety ratings.
Refer to the documentation for each component in the system to
determine the safety and EMC ratings for the entire system.

Safety Guidelines

Caution
documentation. Using the product in a manner not specified can damage
the product and compromise the built-in safety protection.
Attention
en garde de la documentation d'utilisation. L'utilisation du produit de
toute autre façon que celle spécifiée risque de l'endommager et de
compromettre la protection de sécurité intégrée.

Safety Guidelines for Hazardous Locations

The NI 9852 is suitable for use in Class I, Division 2, Groups A, B, C, D, T4 hazardous
locations; Class I, Zone 2, AEx nA IIC T4 Gc and Ex nA IIC T4 Gc hazardous locations;
and nonhazardous locations only. Follow these guidelines if you are installing the
NI 9852 in a potentially explosive environment. Not following these guidelines may
result in serious injury or death.
Observe all instructions and cautions in the user
Suivez toutes les instructions et respectez toutes les mises
NI-9852 Getting Started
ni.com/manuals and complete the
© National Instruments
3