Advertisement

Quick Links

Operating instructions SATAminijet 4400 B RP/HVLP
Content [Original Version: German]
1.
Symbols .................................... 1
2.
Technical Data .......................... 1
3.
Scope of Delivery ..................... 2
4.
5.
Intended Use ............................ 3
6.
Safety Instructions .................... 3
7.
Use ........................................... 5
1.

Symbols

Warning! Risk which could cause heavy injuries or death.
Attention! Risk which could cause damage.
Explosion risk! Warning against risk which could cause
heavy injuries or death.
Notice! Useful tips and recommendations.
2.

Technical Data

Recommended spray gun inlet pressure
RP
Spot Repair
HVLP
Compliant
Compliant legislation Lom-
bardy/Italy
Spot Repair
Recommended spraying distance
RP/RP SR
HVLP/HVLP SR
Max. spray gun inlet pressure
EN-Content-BAL-SATAminijet 4400 B.indd 1
8.
9.
Maintenance ............................. 8
10. Troubleshooting ...................... 11
11. Disposal .................................. 13
12. After Sale Service ................... 13
13. Warranty / Liability .................. 13
14. Spare Parts ............................ 13
Conformity .............................. 15
0.5 bar - 2.5 bar
0.5 bar - 2.5 bar
0.5 bar - 2.0 bar
> 2.0 bar (air cap pressure > 0.7 bar)
< 2.5 bar (air cap pressure < 1.0 bar)
0.5 bar - 2.0 bar
12 cm - 19 cm
12 cm - 15 cm
10.0 bar
EN
1
06.05.2014 10:14:31

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the minijet 4400 B and is the answer not in the manual?

Questions and answers

Summary of Contents for SATA minijet 4400 B

  • Page 1: Table Of Contents

    Operating instructions SATAminijet 4400 B RP/HVLP Content [Original Version: German] Symbols ........1 Cleaning of the Spray Gun ..7 Technical Data ......1 Maintenance ......8 Scope of Delivery ..... 2 10. Troubleshooting ...... 11 Design of the Spray Gun ..3 11.
  • Page 2: Scope Of Delivery

    Operating instructions SATAminijet 4400 B RP/HVLP Air consumption at 2.5 bar spray gun inlet pressure RP/RP SR 200 Nl/min Air consumption at 2.0 bar spray gun inlet pressure HVLP/HVLP SR 120 Nl/min Max. temperature of the spray medium 50 °C Weight | Version without cup 293 g...
  • Page 3: Design Of The Spray Gun

    Operating instructions SATAminijet 4400 B RP/HVLP Design of the Spray Gun [1] [1-1] Spray gun handle [1-9] Anti-drip device [1-2] Trigger [1-10] Round/flat spray control [1-3] Nozzle set consisting of air [1-11] Material flow control screw [1-12] Material flow control counter cap, fluid tip (not visible), paint needle (not visible) [1-4] Spray gun connection with...
  • Page 4 • Never manipulate or technically modify the paint spray gun! • Use original SATA spare parts and accessories only! • Exclusively use spray gun washing machines recommended by SATA! Please observe the operating instructions! • Never spray materials containing acid, lye or benzine! •...
  • Page 5: Use

    10 bar, e.g. Art. No. 53090! Note! The following requirements must be fulfilled: • Use a compressed air connection G 1/4 a or a fitting SATA connection nipple. • Ensure minimum compressed air volume (air consumption) and pres- sure (recommended spray gun inlet pressure) according to chapter 2.
  • Page 6 [3-1] SATA adam 2 mini (accessory / accurate method). [3-2] Separate gauge with control device (accessory). [3-3] Separate gauge without control device (accessory).
  • Page 7: Cleaning Of The Spray Gun

    Operating instructions SATAminijet 4400 B RP/HVLP 7.2. Adjust material flow [4-1], [4-2], [4-3] und [4-4] - mate- rial flow control fully opened Note! With the material flow control fully opened, the wear of the fluid tip and paint needle is reduced to a minimum. Please select the correct nozzle size depending on the material to be applied and the required applica- tion speed.
  • Page 8: Maintenance

    Operating instructions SATAminijet 4400 B RP/HVLP Warning! Attention! • Drillings are to be cleaned with SATA cleaning brushes or SATA nozzle cleaning needles only. The use of other tools may cause damage or may affect the spray pattern. Recommended accessory: cleaning kit Art.
  • Page 9 [7-1], [7-2], [7-3], [7-4], [7-5] and [7-6] Every SATA nozzle set consists of "paint needle" [7-1], "air cap" [7-2] and "fluid tip" [7-3] and has been hand-adjusted to provide a perfect spray pattern. Therefore, always exchange the complete nozzle set. After installation, please adjust material flow according to chapter 7.2.
  • Page 10 1. After disassembly, please check air piston rod [10-4] and clean it, if required. If damaged (e.g. if scratched or bent), replace it and grease with SATA high performance spray gun grease (Art. No. 48173) and insert. Please observe correct order of installation! 2.
  • Page 11: Troubleshooting

    Operating instructions SATAminijet 4400 B RP/HVLP 10. Troubleshooting Malfunction Cause Corrective Action Tighten fluid tip [2-1] Fluttering/spitting Fluid tip has not been spray fan or air bub- properly tightened with universal spanner bles appearing in the Air distribution ring is Replace air distribu- gravity flow cup damaged or clogged.
  • Page 12 Operating instructions SATAminijet 4400 B RP/HVLP Malfunction Cause Corrective Action Round/flat spray con- Regulation valve dirty Remove round/flat trol cannot be regu- spray control, repair or lated replace it, chapter 9.7 Spray gun does not Clogged air piston seat Clean air piston seat shut-off air or worn air piston.
  • Page 13: Disposal

    Please observe local legislation! 12. After Sale Service Please refer to your local SATA dealer for accessories, spare parts and technical support. 13. Warranty / Liability The SATA General Conditions of Sale and Delivery and further contractual agreements, if applicable, as well as the valid legislation at the time apply.
  • Page 14 Operating instructions SATAminijet 4400 B RP/HVLP Art. Description 133983 Air connection piece G 1/4 - G 1/4 197418 Pack of 4 CCS clips (green, blue, red, black) 197467 Pack of 3 air distribution rings 197541 0.125 l QCC quick change gravity flow cup (PVC) 197558 Pack of 4 anti-drip devices for 0.125 l PVC cup 198408...
  • Page 15: Ec Declaration Of Conformity

    SATA GmbH & Co. KG Domertalstrasse 20 D-70806 Kornwestheim We hereby declare that the following product in the version sold by SATA, due to its conception, design and construction complies with the basic safety requirements of the directive 94/9/EU including the modifications valid at the time of the declaration, and that it can be used in explosive areas (ATEX), annex X, B, according to EU directive 94/9/EU.
  • Page 16 Operating instructions SATAminijet 4400 B RP/HVLP 70806 Kornwestheim, March 27, 2014 Albrecht Kruse President SATA GmbH & Co. KG EN-Content-BAL-SATAminijet 4400 B.indd 16 06.05.2014 10:14:33...

Table of Contents