Charging The Battery; Battery Use - Motorola A920 Reference Manual

Charging the Battery

New batteries are partially charged, so you must charge them
before you can use your handset. Some batteries perform best
after several charge/discharge cycles.
Do This
1 Plug the charger
in with the release
tab up.
2 Plug the other end of the charger into an electrical
outlet. While the battery is charging,
and the battery's current charge level (
displays on the screen.
3 When
Charging Complete
and remove the charger. The typical time needed to
fully charge the battery is three hours.

Battery Use

Battery performance depends on your wireless carrier's network
configuration; signal strength; temperature; features and settings
you select and use; and your voice, data, and other application use.
Caution: To prevent injuries or burns, do not allow metal objects to
contact or short-circuit the battery terminals.
To maximise your battery's performance:
• Always use Motorola Original™ batteries and battery
chargers. The warranty does not cover damage caused by
using non-Motorola batteries and/or battery chargers.
22 - Getting Started
displays, press the release tab
Charging Battery
to
Very Low High
)