2" Pan Head Screw - abc Wall-mounted Bookcase With Door Instruction Booklet

Step Step 8
st
1 -Carefully stand your unit upright against the wall in its fi nal location. Strike a mark through the center of the hole in
å
the UPPER FRAMES (H). Lay your unit down.
2 nd -Drill a 5/16" hole on the marks.
å
rd
3 -While you squeeze the wings together, gently tap two WALL ANCHORS (7) into the holes until they are even with
å
the surface of the wall.
Stand your unit upright placing the brackets in the UPPER FRAMES (H) over the WALL ANCHORS (7).
å
Turn two 2" PAN HEAD SCREWS (16) through the holes in the UPPER FRAMES (H) and into the WALL ANCHORS. (7).
å
NOTE: You will need to turn the 2" PAN HEAD SCREWS (16) multiple turns to completely tighten and secure your unit
å
to the wall.

2" PAN HEAD SCREW

(2 used in this step)
Mark and drill a
5/16" hole into
the wall.
16
Mark and drill a
5/16" hole into
the wall.
7
H
nd
2
H
1 st