1-15/16" Hex Head Screw - abc Wall-mounted Bookcase With Door Instruction Booklet

Step 7 Step
Turn the assembly onto its back edges.
å
Fasten the FRAMES (H and K) to the TOP (A)
å
and SHELVES (L). Tighten sixteen 1-15/16" HEX
HEAD SCREWS (15) using the L-WRENCH (8).
NOTE: You should start each SCREW a few turns before
å
completely tightening any of them.
Fasten the LOWER FRAMES (K) to the BRACES (G).
å
Tighten four 1-3/16" HEX HEAD SCREWS (12) using
the L-WRENCH (8).
NOTE: You should start each SCREW a few turns before
å
completely tightening any of them.
These holes
must be closer
to this edge
H
1-3/16" HEX HEAD SCREW
(4 used in this step)
L
L
K
12
8

1-15/16" HEX HEAD SCREW

H
L
A
G
Meet Part (L). This component has
been engineered to be lighter, stronger,
faster... well ok. Not technically faster.
But defi nitely makes for a sturdier wall-
mounted bookcase With door that' s
easier to assemble and friendlier to
the environment.
15
(16 used in this step)
K
G