Table of Contents
Advertisement
Operation
Be sure there are no swimmers in the wa-
ter near you.
EMU27593
Electric start / prime start models
1.
Place the gear shift lever in neutral.
NOTE:
The start-in-gear protection device prevents
the engine from starting except when in neu-
tral.
2.
Attach the engine shut-off cord to a se-
cure place on your clothing, or your arm
or leg. Then install the clip on the other
end of the cord into the engine shut-off
switch.
EWM00121
WARNING
Attach the engine shut-off cord to a se-
G
cure place on your clothing, or your
arm or leg while operating.
Do not attach the cord to clothing that
G
could tear loose. Do not route the cord
where it could become entangled, pre-
venting it from functioning.
Avoid accidentally pulling the cord dur-
G
ing normal operation. Loss of engine
power means the loss of most steering
control. Also, without engine power,
the boat could slow rapidly. This could
cause people and objects in the boat to
be thrown forward.
31
3.
Place the throttle grip in the "
(start) position. After the engine starts,
return the throttle to the fully closed po-
sition.
4.
Turn the main switch to "
and hold it for a maximum of 5 seconds.
5.
Immediately after the engine starts, re-
lease the main switch and allow it to re-
"
" (start),
Advertisement
Table of Contents
