Table of Contents
Advertisement
the main switch to "
move the key, and remove the cord
from the engine shut-off switch. Turn
off the battery cut-off switch if your
boat has one.
Do not use your hand to hold the pro-
G
peller when loosening or tightening the
propeller nut. Put a wood block be-
tween the anti-cavitation plate and the
propeller to prevent the propeller from
turning.
Checkpoints
Check each of the propeller blades for
G
wear, erosion from cavitation or ventila-
tion, or other damage.
Check the propeller shaft for damage.
G
Check the splines for wear or damage.
G
Check for fish line tangled around the pro-
G
peller shaft.
" (off) and re-
G
EMU30661
Removing propeller
EMU29196
Spline models
1.
2.
ZMU04262
ZMU01897
3.
Check the propeller shaft oil seal for dam-
age.
Straighten the cotter pin and pull it out
using a pair of pliers.
Remove the propeller nut, washer, and
spacer (if equipped).
1. Cotter pin
2. Propeller nut
3. Washer
4. Spacer
5. Propeller
6. Thrust washer
Remove
the
equipped), and thrust washer.
Maintenance
1
3
6
4
5
ZMU03842
propeller,
washer
2
(if
60
Advertisement
Table of Contents
