Advertisement
6 Sound check
At this point, you should have cables connected
and power to each piece of equipment.
Play a track on your iPod, laptop, etc. to test you
have music playback.
Speak into each mic you have to ensure there is
signal and sound.
TROUBLESHOOTING
• Check that cable connections are secure to and
from equipment
• Check that mixer's Master volume (red knob) is up
• Check three signal knobs on the back of the speaker
are set to 12:00 position. (May adjust if needed but
start there)
• Check that music is playing on your device and
check the volume setting
WAGER AUDIO
text: 503-799-5964
email: info@wageraudio.com
Advertisement
